View all FOSROC products


Renderoc HB40 concrete reinstatement mortar is supplied as a ready to use blend of dry powders which requires only the site addition of clean water to produce a highly consistent, medium-weight repair mortar. It is based on Portland cements, graded aggregates, lightweight fillers and chemical additives which provide a mortar with good handling characteristics while minimising water demand. The low water requirement ensures good strength gain and long-term durability. Uses:For the reinstatement of large areas of reinforced concrete where low permeability and low shrinkage characteristics are required and where higher compressive strength is an important consideration. Renderoc HB40 has been engineered for the repair of columns and beams. Its relatively low fresh wet density makes it also suitable for soffits and other overhead repair work. The mortar can also be used for small, localised patch repairs. where compatibility with lower strength concrete is required, but low permeability and high-build characteristics are important, Renderoc HB25 should be used. For higher strengths Renderoc HB70 should be used. Renderoc HB40 is suitable for use with Galvashield XP incipient anode protection and Cathodic Protection system. Contact Parchem for further details.
  • Compatible with concrete strength in the range 30 to 45MPa
  • Abrasion resistant - suitable for aggressive
  • Environments
  • Shrinkage compensated - provides long term
  • Dimensional stability
  • Low permeability to potentially damaging water, CO2
  • and chloride ions
  • Suitable for use with Galvashield anodes
  • Faster high build repairs. Pre-bagged to overcome site-batched variations - only. The site addition of clean water required. Complies to AS/NZS4020:2005 - suitable for use in. Potable water


Product TypeRepair Mortar
Package Size20  kg
Package TypeBag
Physical FormPowder
Mix Ratio2:1
Specific Gravity1.27
Solubility (Yes/No)No
Relative Vapour Density>1
Shelf Life24 months
Storage ConditionsDry Conditions
Operating Temperature Rating-5 to +35 °C
ApplicationsColumns and Beams, Small, Localised Patch Repairsetails
Box Quantity: 50
Product Code: PARCFC302020-20KG
SKU: FC302020-20KG
All Stores Availability: 371 In Stock. Please contact us for branch-specific stock levels.
Price: $85.32 Each
Ex Tax:
$77.56 Tax: 77.56200000 Price Suffix: Each

   - OR -   

Add To Favourites

Array ( [language] => en [currency] => AUD [cart] => Array ( ) )