3M HIGH POWER SPRAY GUN CLEANER AEROSOL 426G
View all 3M products
PRODUCT DESCRIPTION
3M™ High Power Spray Gun Cleaner is a low VOC aerosol specifically formulated for removing waterborne and solvent-based coatings from metals, plastic and composite surfaces. This spray gun cleaner meets SCAQMD Rule 1171 requirements. Cleanest Disposable Cup System Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible. Reduce Material Waste by Mixing in the Cup 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. Use the “max fill” notation on each cup to fit the maximum amount. The window also allows to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting. Improved Fluid Flow for More Consistent Paint Application 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed. A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. Use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size. Use the Right Size Cup for Every Repair PPS™ 2.0 Spray Cup System. Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing. Reduce Solvent Usage by up to 70% After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent. PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption. Reduces the Chance of Contamination Between Jobs Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.
FEATURES & BENEFITS
Helps reduce the use of cleaning solvents
TECHNICAL SPECIFICATIONS
3M™ High Power Spray Gun Cleaner is a low VOC aerosol specifically formulated for removing waterborne and solvent-based coatings from metals, plastic and composite surfaces. This spray gun cleaner meets SCAQMD Rule 1171 requirements. Cleanest Disposable Cup System Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible. Reduce Material Waste by Mixing in the Cup 3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. Use the “max fill” notation on each cup to fit the maximum amount. The window also allows to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting. Improved Fluid Flow for More Consistent Paint Application 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed. A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. Use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size. Use the Right Size Cup for Every Repair PPS™ 2.0 Spray Cup System. Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing. Reduce Solvent Usage by up to 70% After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent. PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption. Reduces the Chance of Contamination Between Jobs Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.
FEATURES & BENEFITS
TECHNICAL SPECIFICATIONS
| Product Type | Adhesive Cleaner |
| Capacity | 426 g |
| Applicable Industries | General Industrial |
| Application | Painting |
| Application Method | Spray |
| Physical Form | Aerosol |
| Package Quantity | 6 per Case |
Brand: 3M
Product Code: 3M60455091904
SKU: 60455091904
Product Code: 3M60455091904
SKU: 60455091904
All Stores Availability:
This is a non stocked item. Please contact us for more information regarding approximate delivery times.
Price:
$20.51 Each
Ex Tax: $18.65
Box Quantity: 6Ex Tax: $18.65
Qty:
- OR -